- Computer Cables & Connectors[10]
- RAMs[1]
- Speakers[2]
- Connectors[3]
- Terminal Blocks[10]
- Fuses[6]
- Inductors[8]
- Relays[10]
- Push Button Switches[7]
- Diodes[2]
- Integrated Circuits[10]
- Oscillators[10]
- Sensors[5]
- Thyristors[1]
- Transistors[2]
- LED Displays[9]
- Acoustic Components[3]
- Resistors[4]
- Ultrasonic[2]
- Other Lights & Lighting Products[1]
- Potentiometers[1]
- Instrument Parts & Accessories[10]
- Antennas for Communications[3]
- Contact Person : Ms. Leung Antonia
- Company Name : Shenzhen E-Chips Technology Co., Ltd.
- Tel : 0086-755-82867603
- Fax : 0086-755-83793928
- Address : ,,FLAT/RM 5 6/F SHUN ON COMM BLDG 112-114 DES VOEUX RD CENTRAL HK
- Country/Region : China
Mini QL2006 USB PIC Programmer for Microchip MCU
Related Product Searches:Mini QL2006 USB PIC Programmer for Microchip MCU,High Quality,Mini QL2006 USB PIC Programmer for Microchip MCU, stm32 development board,Mini QL2006 USB PIC Programmer for Microchip MCU
Wholesale Mini QL2006 USB PIC Programmer for Microchip MCU
Introduction
Mini_QL2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.
Mini_QL2006 is applicable for almost all PIC10/12/16/18 series Microcontroller's except 16C5X. It also supports memories in 24XX series and 93XX series.
Features
Features of Mini_QL2006 Programmer: 1.High performance-price ratio, designed with the updated PIC programming algorithm, higher speed than other similar products, stable performance, support more devices. Support online upgrade of programmer hardware, easy and convenient upgrade. communication modes of USB port, convenient for application on lap-top computer which doesn’t have serial port (convenient connection of one USB cable with computer). Automatic programming function and automatic programming process enable mass production for customer’s great convenience (programming available on chip installation without pressing any other key).
2.Overall message indication, audio plus word will enable customer well informed about operating status.
3.Through built-in ICSP interface, support ICSP (in-circuit serial programming) directly without any additional device. User may program after circuit board is welded. For FLASH Microcontroller, online upgrade is available.
4.Equipped with 40pin DIP socket, available for direct programming of 8pin-40pin DIP chip. Programming of other surface mount device (SMD) is available based on universal adaptor.
5.Compatible with operating systems (OS) including Windows98, Windows2000/NT and Windows XP, Windows 2003, Windows Vista.
6. Function of programming counting, can preset and count the programming number.
7.Function of serial number auto-increment, available to set auto-increment area as program area or EEPROM data area, set auto-increment system, set auto-increment start address/end address and auto-increment step, set to ignore high byte in auto-increment to avoid effect to RETLW instruction in auto-increment part of program
8.Program supports load of *.HEX or *.BIN files, available to converse *.BIN files to *.HEX format.
9.With programming data monitoring. Through check summing, available to find immediately if programming data is changed or not. Verification and formula are subject to definition of Microchip.
10.Programmer hardware auto-search when start of software, no need for software setup before use, easier and more convenient operation.
11.High programming success rate, enough programming depth. Programmable voltage, electrical parameter of programming and programming algorithm satisfy the technical specifications of manufacturers.
Hardware
There is no special requirement for installation of this programmer.
Connect programmer to PC through USB cable, then the programmer works. (This programmer supports direct USB power supply, you may not connect external power. However, if current through USB interface is very low – less than 200MA and insufficient to drive programmer, connection to external power is required to enable the programmer to work regularly.)
Software
Find file QL-PROGvXXen.EXE under root directory of CD, double click this file to access installation interface of application software, and operate according to prompts to finish the installation.Its shortcut will appear on desktop automatically after installation.
After proper installation, shortcut of this software will appear on desktop. We can double click it to run the software. (Note: Run the software after proper connection of hardware so as to identify the hardware easily.)
Pls send your purchase List,BOM List to our Sales department!| LTC1605IN#PBF | IC A/D CONV 16BIT SAMPLNG 28-DIP | - | Linear Technology |
| ADS7841P | IC 12-BIT A/D 4CH SERIAL 16-DIP | - | Texas Instruments |
| TC811CKW713 | IC A/DCONV 3 1/2DGT LOPWR MQFP44 | - | Microchip Technology |
Mini QL2006 USB PIC Programmer for Microchip MCU
